![]() ![]() What these newer ones don't have that the older ones did was a foam block under the chasis, and once enough water got it, it would lower and sit on this for washing, when draining started, it would lift up as less weight was inside.since it does not have this you may hear it bounce along the bottom cabinet once in a while during a heavy load, but no harm will be done. ![]() Just do little 1/4 to 1/2 turn increments at a time, you will have to let the machine completely drain and refill to check after each turn, but you will get there. On the right hand side, and it should be attached to the crossmember, is the pressure switch, and should be a phillips head screw that you turn clockwise to raise the level.Ĭan be done in minutes, provided you have some mechanical knowledge. ![]() Pop the top, actually theres screws along the back that have to come out, and slide the top a little forward and lift off. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |